Optimal flow model for plot irrigation.

Authors

  • Heber Saucedo Instituto Mexicano de Tecnología del Agua
  • Manuel Zavala Universidad Autónoma de Zacatecas
  • Carlos Fuentes Universidad Autónoma de Querétaro
  • Vladimir Castanedo Instituto Mexicano de Tecnología del Agua

Keywords:

plot irrigation, Richards equation, Saint-Venant equations, optimal irrigation flow

Abstract

The primarily linear relationship was verified between the length of a plot and optimal irrigation flow, which is the flow needed to obtain the maximum value of the uniformity coefficient, resulting in high values for application efficiency and the amount of irrigation required. This verification was performed by applying a complete hydrodynamic model using numerical methods, based on Saint-Venant equations to describe water surface flow and internally coupled with the Richards equation in order to model it. Operating design tables for plot irrigation were developed based on the results obtained from applying the model to 10 different types of soil.

Downloads

Published

2013-08-03

How to Cite

Saucedo, H., Zavala, M., Fuentes, C., & Castanedo, V. (2013). Optimal flow model for plot irrigation. Tecnología Y Ciencias Del Agua, 4(3), 135–148. Retrieved from https://www.revistatyca.org.mx/index.php/tyca/article/view/370

Issue

Vol. 4 No. 3 (2013)

Section

Articles

License

By Instituto Mexicano de Tecnología del Agua is distributed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License. Based on a work at https://www.revistatyca.org.mx/. Permissions beyond what is covered by this license can be found in Editorial Policy.

Most read articles by the same author(s)

1 2 3 4 > >>